From:             "Klecker, Hermann (H.)" <hklecker@ford.com>
To:               "'infrared@a1.nl'" <infrared@a1.nl>
Subject:          Agfa APX 200S with non Agfa developers
Date sent:        Fri, 18 Feb 2000 12:21:19 -0500
Send reply to:    infrared@a1.nl

Hi List,

does somebody have experience/recommendations for Agfa 200S with Ilford
ID-11, Kodak D-76, T-MAX or Tetenal Ultrafin plus or Emofin developers. I
have them on stock and do not want to by a bottle of rodinal unless this
stock is reduced somehow.

Hermann







Date sent:        Fri, 18 Feb 2000 23:44:47 +0100
From:             Eckhard Stephan <eckhard.stephan@writeme.com>
To:               infrared@a1.nl
Subject:          Re: Agfa APX 200S with non Agfa developers
Send reply to:    infrared@a1.nl

> Hi List,
> 
> does somebody have experience/recommendations for Agfa 200S with Ilford
> ID-11, Kodak D-76, T-MAX or Tetenal Ultrafin plus or Emofin developers. I have
> them on stock and do not want to by a bottle of rodinal unless this stock is
> reduced somehow.
> 
> Hermann
> 

Hello Hermann,

I got good results with the following combination:

Exposure:

ISO 200 with a Wratten #25, metering through the filter

Dev.:

D-76, stock solution, 20 °C / 68 °F, 10 min. Agitation continuously for
the first 30s, then 5s every 30s ("the Kodak way").

IMO, this combination should also work for ID-11. AFAIK, ID-11 and D-76
are almost, if not completely, identical.

Hope, this helps.

Eckhard